Modern Computer Architecture and Organization, by Jim Ledin. Published by Packt Publishing.
The example below shows the BCD (boot configuration data) information stored on a Windows 10 system. To display this information on your computer, you must run the bcdedit command from a command prompt with Administrator privilege:
C:\>bcdedit
Windows Boot Manager
--------------------
identifier {bootmgr}
device partition=\Device\HarddiskVolume1
path \EFI\MICROSOFT\BOOT\BOOTMGFW.EFI
description Windows Boot Manager
locale en-US
inherit {globalsettings}
default {current}
resumeobject {92f49995-fef7-11e8-a8e2-e508765ab07c}
displayorder {current}
toolsdisplayorder {memdiag}
timeout 0
Windows Boot Loader
-------------------
identifier {current}
device partition=C:
path \WINDOWS\system32\winload.efi
description Windows 10
locale en-US
inherit {bootloadersettings}
recoverysequence {92f49998-fef7-11e8-a8e2-e508765ab07c}
displaymessageoverride Recovery
recoveryenabled Yes
isolatedcontext Yes
allowedinmemorysettings 0x15000075
osdevice partition=C:
systemroot \WINDOWS
resumeobject {92f49995-fef7-11e8-a8e2-e508765ab07c}
nx OptIn
bootmenupolicy Standard
debug Yes